AUTOMATED BIOMASS
Crown Royal Stove’s wood chip boiler is an automated fed system with a storage bin, designed to be located next to your fuel storage for convenience, and is normally filled once a week (or longer), depending on the temperature outside and BTU’s needed. Our wood chip boiler burns numerous types of fuel: woods chips, wood pellets, coal, silage, etc. The ability to burn multiple fuel types provides significant value, as almost all users can access at least one or two locally sourced biomass fuels for a fraction of the price of propane or natural gas.
Burns Multiple Fuel Types:
• Wood Chips • Wood Pellets • Corn • Coal
Crown Royal Stoves Biomass Boiler are the most economical way to heat in the winter months.
OUR WOOD CHIP BOILER HAS SHAKER GRATES AND AN ASH PAN DESIGN WHICH WERE PURPOSEFULLY DEVELOPED FOR QUICK AND EASY CLEANING.
The introduction of combustion air under the grates gives a hotter and cleaner burn, while additional air is injected from above the fire, burning the gases, producing a cleaner burn that uses less fuel.
Energy efficient, and using locally sourced, renewable fuel, make these units the top choice for many consumers. Virtually any existing heating system can be converted into heating with a Crown Royal Biomass Furnace.
The Crown Royal Stoves wood chip boiler has triple pass heat exchangers and stainless steel heat transfer tubes that produce the highest possible efficiencies; the bottom line, you will burn less. In addition to these features, it is equipped with a turbo draft fan that produces secondary combustion. For the best corrosion resistance and heat transfer possible, our firebox and outer drum is constructed out of 409 Titanium Enhanced Stainless Steel.
The Biomass Series is available in one model with a heating capacity of 950,000 BTU’S, with the ability to turn down to 300,000 BTU’S.
BIOMASS MODEL SPECIFICATIONS
Models: BIO950
Estimated Weight: 4,000 LBS
Width: 64″
Length: 92″ + Fuel Bin
Height: 93″
Slab Dimensions: 12′ x 30′
Chimney Size: 6″
Door Size: 22″ x 22″
Supply Size: 2 – 2″
Return Size: 2 – 2″
Water Capacity: 420 Gallons
Lower Primary Combustion Blower: 150 CFM
Over Fire Combustion Blower: 150 CFM
Negative Pressure Exhaust Motor: 3,450 RPM
Approximate BTU’S: 950,000
Insulation Roof: R30
Insulation Walls: R30
409 Stainless Steel: YES
OTHER FURNACE FEATURES
HIGHLIGHTED FEATURES
409 Titanium Enhanced Stainless Steel
Shaker Grate System with Removable Ash Pan
Stainless Steel Heat Transfer Tubes
Fan Forced Draft
Class A Insulated Chimney
on-Stick Door Gasket
Insulated – Walls R30, Roof R30
Water Level Indicator
Safety Latch Firebox Door
Digital Control Panel
Secondary Combustion
Triple Pass Water Filled Heat Exchanger
20 Year Limited Warranty
BENEFITS
Burns Multiple Biomass Fuels
Works with Any Existing System
No Carbon Monoxide Inside
Removable Ash Pan
Long Burn Times
Once a Week Loading or Longer
Automatically Fed
Cost Effective Heat Source for Large Buildings
Multiple 2″ Supply & Return Connections
Easily Removable Rear Access Door to Plumbing Connections
Light for Night Loading
ADVANTAGES
Clean, Efficient & Safe
Low Maintenance
Lower Heating Costs
Low Emissions
Locally Sourced Fuels
Not Reliant on Foreign Fuels
Made in the USA
FURNACE APPLICATIONS
Greenhouses
Commercial Buildings
Warehouses
Barns & Agricultural Buildings
Radiant In-Floor Heating
Large Garages & Workshops
Pools/Hot Tubs
Domestic Hot Water